Thread: Getting Started with Salaris 10

The Solaris Operating System doesn't need any introduction. It's one of the most popular UNIX-based operating systems devel¬oped by Sun Microsystems for its SPARC platform as well as the x86 and x86-64 based workstations and servers. Solaris 10 was released in early 2005, and has undergone many upgrades since then.

Starting this month, we'll take you through the world of Solaris and how to make the most of it. We'll start with a features overview and and how to in¬stall and get started with Solaris on the x86 platform. In later issues. we'll delve deeper into the key features, and how to configure and use them.

Key features
Compared to previous releases. many 'significant improvements have been brought in Solaris lOin networking, data management, and installation. Plus, there are many components in it that you'll not find in most other Operating Systems. Here's a quick overview of those features:
SoIaris Dynamic Tracing: short for DTrace. the feature helps developers debug applications in realtime, and one doesn't need to reboot the system to start the process.
SoIaris Containers: These allow each application in Solaris to run in an isolated environment just like the usual 'Application virtualization' concept.

Predictive Self Healing: A feature with which the system recovers itself automatically in case of any fault in software or hardware.

Solaris Zettabyte File System: ZFS is the file system in Solaris 10, which has many good features like an end-to¬end checksum for all data, better performance, higher scalability, and much more.

Solaris Trusted Extensions: A new feature in Solaris 10, which separates data security policies from data owner¬ship.
Installing Solaris 10. We've given an ISO of Solaris 10 on this month's 'PCQXtreme' DVD. Burn iton a DVD and boot any x86 system from it. We suggest you have at least 512 MB RAM and 7 GB of free hard drive space on the system.

The installation of Solaris is initi¬ated by Grub and unlike other OSs, there are more manual steps involved in it. Like Linux distro installations, So¬laris also gives two installation options: graphical and text modes. For selecting the graphical mode choose the 'SoIaris Interactive' option, else press 'F2' to in¬stall in text mode.

Next select the language you want to use during the installation and click on 'Next.' An installation program welcome screen greets you. showing the list of information that will be collected from you during the installation process and in the next step you will see a Solaris 10 welcome screen. Having two wel¬come screens in an installation process is something undesirable and could be easily integrated to reduce the number of steps.

Next you have to choose the action to be performed after the installation is complete: automatically restart and eject the media or complete the process manually. Doing manually is better be¬cause any ways you have to remove the DVD from the drive to prevent it from restarting the installation. Select the media you will be installing from. which in our case is DVD. Other options are CD or over the network.

The remaining installation steps are pretty much similar to any other as installation. You have to accept the li¬cense agreement. select from default or custom installation. or even a 'non-networked' option. in which the machine will not have any networking capabili- . dress, sub net mask. and card name for ties. each network card. You'll then have to Then you can choose to assign the as an IP or take it from a nearby DHCP server running on your network. If you're assigning it an IP yourself, then the as will automatically detect all the network cards in the machine. You'll then have to manually enter the IP ad- give a machine name, after which it asks whether you want to enable IPv6. If your network has support for it, then enable the same.

Finally, it shows you a 'ready to in¬stall' screen with a summary of what you selected for installation, layout of the HDD. file system, etc. Click on 'Install Now' button to start the installation. Once the installation is completed, and you'll be shown a Terminal screen. Sim¬ply type '#reboot' on this terminal to reboot the system.

Remove the DVD and reboot. Your Solaris 10 system is ready to be configured. Once the installation is done, Solaris auto¬matically boots into its GUI, giving you a normal login and ~plash screen. Interest¬ingly, Solaris 10 contains both server as well as desktop applications like StarOffice 7, Gimp. and the usual web browser, mail clien t, etc.

Getting used to configuring and using Solaris will take some time. and we'll talk about it in more detail in the n ext issue.