Thread: Xigmatek VGA Cooler Bifrost VD1065 cooler

Xigmatek has now made even a respectable name in the area of the CPU cooler and with one or the other housing. But now sends the Bifrost Xigmatek VGA Cooler VD1065 a cooler for VGA cards into the race. Whether Xigmatek can tie the cooler to success and as usual, the cooler is processed. The Bifrost Xigmatek cooler is equipped with a black cover, located under the two 100 mm fan.The fans will operate at 2000 rpm at a volume of about 20 dB (A). Under the fan cover are then the cooling fins. These are at a distance of approximately: 3 mm pressed on the 5 heatpipes. The workmanship is perfect and leaves no room for criticism.



The heatpipes sit directly on the GPU and the HDT-practice (Heatpipe Direct Touch) so as to ensure a better heat dissipation. The base plate is made so that the highest possible compatibility was made to the graphics card. This was ensured by the integration of different mounting holes and their different hole spacing. From the cooler bottom of the absorbed heat is then discharged through the heat pipes to the cooling fins. The nature of the cooler soil can be described as very good. He is completely and properly plan is based on the GPU.

Xigmatek has shown with the Bifrost VGA cooler once more what is possible by means of such a radiator. The quality and workmanship is excellent and the performance more than adequate. If you want something so cool its graphics card is better served with the Bifrost Xigmatek well. The volume of two 100 mm fan is very pleasant and can be described as quiet. However, considering the high quality and good workmanship it can be described as very favorable.