How to adjust 2 fans on the similar CPU board for excellent discussion

[Madelynn lucila]

I have contained a HAF 922 case, by means of ASUS P6T mobo. The case has three fans, one frontage 200mm, one top 200mm, and one take care of 120mm. Extra than the mobo simply have covered 2 chassis fan links, which has Q-fan direction. So I am wondering how be guessed to I link the three case fans. Attach them the full to the PSU to rum maximum velocity or buy a fan link splitter and attach them the full to the mobo so they the full have Q-fan direction. Or link 2 to mobo and the preceding one to PSU.

[Leya Dorian]

You had linked the full to your fans to the psu. Except the central processing unit fan of course. Yes I choose connecting them to the psu as well. One less thing with the purpose of the MB has to do and one less electrical obsession drawing ability beginning from it. Then you do not have the mobo determine the case fan velocitiess various extra. So do you observe with the purposes of Q-fan operate for case fans are recently fluffs, not requirement. As a first level on making this conclusions, I would be tended to tell with the purposes of 2 of the case fans be guesseds to be controlled by the mobo beginning from side to side its SYS_FANx ports, and the remainders fan provideds by a Molex link beginnings from the PSU, if at all potential by means of its self manually-set velocity controller two or three velocity levels.

[Zurine Rogelio]

At recent the simply consequence refers me is sound, I have comprised not locate them both now, other than I am afraid it would be also raucous. Then I had superior revolutionize the board to PSixT Deluxe. I be guessed to have contained and order the Deluxe as an optional of this one. I had bought a scythe IV-fan controller, to attain the balance of demonstration and tranquility. The mobo Q-fan control for framework fan is also sound, I less them by 100rpm, and the temperature of the entire thing stays the same, at the similar time as it is at recent much stiller. I necessitate to hook up three chassis fans and one case light the whole three pin links to my mobo and or psu.

[Faqueza Nekane]

Other than presume you hope to link the full 4 fans in such a way with the purpose of the mobo CHA_FANx slots be capable to ability and check them. Well, by means of three-pin fans at least you near surely be capable to do this by means of a little number of restrictions. The button is to realize with the purpose of the 3 wires necessitateds are Ground often black, + VDC furnish (commonly red, and changes in voltage according to fan velocity the mobo is testing to get), and yellow fan velocity pulsation signal fed back to mobo to be read. So for one CHA_FANx mobo link you might assume 2 fans' adjusts of leads and transform them so with the purposes of both are fed beginning from one link.

[Filipa Godofred]

Currently to sure, the case fans are the 2 with the purposes of I introduced in the front of the case and the chassis fans are the ones antecedently construct into the case in the up and backs. Well, they are the complete case or chassis fans. Give permission me rephrase Plug the two fans construct into the casing into the molex links and location the velocitys by means of the diminutive switches. Do not plug various case fan into the mobo's PWR_FAN link. With the purposes of slot is for one purposes simply. If your PSU has a wire arriving out of it by means of a "fan connector", plug with the purposes of into this mobo link; if your PSU does not have comprise on of these, leave this mobo link unexploited.

[Jovana Molara]

The easiest option is to connect two to Molex power outputs beginnings from the PSU, still though this decides to function those fans at complete velocity the full time. If you buy might arrive by means of your fan a velocity controller with the purposes of slips into the line to every fan, you be capable to adjust it to some dumber set velocity. Then you plug the extra 2 fans into the mobo's CHA_FANx pinouts. At present, what you assume beginnings from with the purpose of may so according to the mobo's capabilities. At least one of them decide to be below control of a velocity control loop in BIOS with the purpose of utilizes a considered temperature signal beginnings from a sensor construct into the mobo. Maybe both are controlled this kind, or may be the second one is a set velocity.