Thread: Reserve xt blocks functioning

Hey I use zalman reserator xt cooling system but when I begin the system, the reserator begins in auto mode and then stops later sometime through giving plenty of beeps!i have tested reset it but it did not changing anything! When I switch it to the manual mode and if the volume so low it will too stop, but when I turn it to the highest velocity then it stays functioning! The flow rate is ever 0.5 and never exceeds it. I have substituted the one reserator because of this trouble before too! Please assist me?

It appears similar you are not acquiring the perfect water flow for system in auto mode and that is why it is shutting itself to keep from any harm! assure the lines and the water blocks to see if there is any trouble that might be causing it! waterblock require regular cleaning specially if you are not utilizing distilled water for your system! See if there is anything trapped in among the blocks !

No there is nothing unfree in my water stops and I have too cleaned my reserator !i too tilted the entire reserator to see if there is any air trapped inner any water block butthat did not assist me! As this is the latest system so there is no require for de-assembling the system too! My reserator has FluidXP+ Ultra Coolant with Z-7 UV which is excellent in the serial so there is no consequences associated to function!

I have purchased the silver reserator xt and it was too beeping again and again it was not degassing perfectly! I had spent nearly Six hours figuring out it but it did not function and I had to back it for repairing it, second reserator that I had purchased started showing the similar trouble and had to return it for third one also! This time I ordered the black one and that figured out the trouble, it degassed automatically when switched to automatic!