Thread: Cooler expert storm enforcer fan inserting unwanted pressure on my CPU

I have Cooler Expert storm enforcer with 200mm front fan, top exhaust fan of 45 cfm and 120mm fan on the back exhaust. Since I am acquiring force on my system , I am imagining of substituting the top and rear exhaust fan with gears blaster 103 cfm! Can you guys give any advice to me on this?

You should using the incoming and outgoing fan within 10 percent of space from each other. You should have insert air fan on the front, side and at the down of the cabinet and exhaust fan on the top and back side of the cabinet. If your exhaust fan is larger than the cooling fan then more air will pass inner of the system then the quantity of the air that is going out of the system. You can too utilize the fan control to keep the fan velocity and its rpm. Ever go with the form that will keep the lowest temperature in your system.

You can utilize the NZXT fan controller for your system which arrive with touch display interface. It has the 5 velocity controls for your fan. You can rapidly create velocity choice and it too gives you the reply in so quick time. It depict the temperature in both C and F. it too provides you the automatic and manual mode to control the velocity of the fan. It has voltage control of 10 watts assigned for all channel. Most significant of entire is that it is compatible with all types of the fans.