- 4-72 pin SIMM slots (1-64meg FPM DRAM)
- 2-32bit VESA Local Bus slots
- 5-16bit ISA slots
- 1-8bit XT slot
- 64k-256k CACHE support in 8-28pin sockets + 1 TAG RAM socket
- AWARD Auto-Detect Bios with Energy Mgmt.
- Supports LBA Mode Control & Large Disk DOS Compatibility.
- Green PC Connector
- VIA chipset (version # needed)
- Supports 3.3v/5volt CPU's and clock speeds 2x/2.5x/3x
- 237pin ZIF CPU socket which supports these processors:
INTEL 80486SX,80486DX/DX2/DX4,P4S,P23S,P24C,P24CT,P24D,P24S
Pentium Overdrive
CYRIX CX486S(M6),CX486DX(M7)
AMD AM486DX,AM486DXL
- Supports speeds of 25/33/40/50/66/75/100(internal)MHz.
- Multi-I/O chip supports 2 - serial ports, 1 - game port
2 - IDE interfaces supporting 4 devices, PS/2 mouse support
1 - parallel port with EPP & ECP, 1 - floppy disk interface.
- Manufactured by: FIRST INTERNATIONAL COMPUTER, INC.
==View or Print jumper settings using Fixedsys or New Courier fonts==
486-GIO-VT2 VESA Motherboard
- 4-72 pin SIMM slots (1-64meg FPM DRAM)
- 2-32bit VESA Local Bus slots
- 5-16bit ISA slots
- 1-8bit ISA slot
- 64k-256k CACHE support in 8-28pin sockets + 1 TAG RAM socket
- AWARD Auto-Detect Bios with Energy Mgmt.
- Supports LBA Mode Control + Large Disk DOS Compatibility.
- Green PC Connector
- VIA GMC VT82C496A PC/AT chipset
- Supports 3.3v/5volt CPU's and clock speeds 2x/2.5x/3x
- 237pin ZIF CPU socket which supports these processors:
INTEL 80486SX,80486DX/DX2/DX4,P4S,P23S,P24C,P24CT,P24D,P24S
Pentium Overdrive
CYRIX CX486S(M6),CX486DX(M7)
AMD AM486DX,AM486DXL
- Supports speeds of 25/33/40/50/66/75/100(internal)MHz.
- Multi-I/O chip supports 2 - serial ports, 1 - game port
2 - IDE interfaces supporting 4 devices, PS/2 mouse support
1 - parallel port with EPP + ECP, 1 - floppy disk interface.
- Manufactured by: FIRST INTERNATIONAL COMPUTER INC.
CONNECTIONS
-------------------------------------------------------------------------
Purpose Location Purpose Location
-------------------------------------------------------------------------
PS/2 mouse interface CN1 Turbo switch J12
Game interface CN2 Turbo LED J13
PS/2 mouse port CN4 Reset switch J14
Serial port 2 CN7 Speaker J15
Serial port 1 CN8 Power LED + keylock J16
Floppy drive interface CN9 Green PC connector J17
Parallel port CN10 Green PC connector J23
IDE interface (primary) CN11 Green PC connector J24
IDE interface (secondary) CN12 IDE interface LED (secondary) J25
External battery J1 32-bit VESA local bus slots SL1/SL2
IDE interface LED (primary) J8
USER CONFIGURABLE SETTINGS
--------------------------------------------------------------------------
Function Jumper Position
--------------------------------------------------------------------------
Monitor type select monochrome/EGA/VGA J2 Open
Monitor type select color J2 Closed
D Battery type select internal J3 2 + 3closed
Battery type select external J3 1 + 2 closed
D VESA IDE interface enabled J4 1 + 2 closed
VESA IDE interface disabled J4 2 + 3 closed
D CMOS memory normal operation J7 Open
CMOS memory clear J7 Closed
D Local HDD-BALE disabled J9 Open
Local HDD-BALE enabled J9 Closed
D Local HDD-IOCHRDY disabled J10 Open
Local HDD-IOCHRDY enabled J10 Closed
D ISA HDD BALE disabled J26 Open
ISA HDD BALE enabled J26 Closed
D ISA HDD-IOCHRDY disabled J27 Open
ISA HDD-IOCHRDY enabled J27 Closed
D AM486DXL2 speed select 2x J30 Closed
AM486DXL2 speed select 3x J30 Open
D Game port enabled J31 Closed
Game port disabled J31 Open
D CPU type select Intel SL and all others JCX2 1 + 2 closed
CX486S/DX P24D JCX2 2 + 3 closed
D Factory configured - do not alter JP1 2 + 3 closed
D Factory configured - do not alter JP2 2 + 3 closed
D Cache type select write through JTl Open
Cache type select write back JTl Closed
D Factory configured - do not alter JW1 N/A
D Factory configured - do not alter JW2 N/A
D Factory configured - do not alter JX1 2 + 3 closed
D IDE interface enabled JG 2 + 3 closed
IDE interface disabled JG 1 + 2 closed
D Floppy drive interface enabled JH 2 + 3 closed
Floppy drive interface disabled JH 1 + 2 closed
D Parallel port unidirectional (printer) JI closed
Parallel port bidirectional JI open
(D = Default setting)



Reply With Quote

Bookmarks