Resources Controlled By

Default: Auto (ESCD)

You should leave this item at the default Auto. If you find that you cannot get a particular expansion card to work properly, you might be able to solve the problem by changing this item to Manual and manually configuring the card. If you change this item to Manual, a series of items will appear that allow you to define the assignments of the system interrupt lines (IRQS) and Direct Memory Access (DMA) channels. By default, these items are set to PCIIISA PnP.

Assign IRQ ForVGA

Default: Enabled

To assign an IRQ to VGA card if you enable
this item.

Assign IRQ For USB

Default: Enabled

To assign an IRQ to USB Ports if you enable this item.

Name: 44.jpg Views: 4445 Size: 24.5 KB

PC Health Status

This option displays a list of PC health status which are detected by on board sensor chips.

CPU Warning Temperature

Default: Disabled

When this item is enabled, we can set the CPU warning temperature. If the CPU temperature is higher than the setting temperature, the system will beep.

Current System Temp: This field displays the current system temperature.

Current CPUI Temperature: It shews the current CPU temperature

Current CPUFANI Speed

Current CPUFAN2 Speed

Current CPUFAN3 Speed

It shows the running speed of the system fan chassis fan and power fan. The value will be changi when the system is running. If you do not install thl fan, the value will show O.

Shutdown Temperature

Default: 60° C/140° F

When the system temperature reaches 60' 140°F, it will shutdown.