Thread: Weird problems

Hello

I have a weird problem too ... first; I say my computer's specifications:

AMD 165 dual core
Memory Corsair XMS
MSI K8N SLI board
Seagate SATA 2
Gigabyte GeForce 7900 GT

Is that this motherboard only has given me headaches ... I can not pass 240 fsb stable, between 240 and 250 share when it occurs, and with 250 or more just did not even try starting,I know this because my memories are more than 250 did not even turn, no problem of memory, which can reach 250 without problems, even so, did not even placed in 133 and processor 250, or even so successful, probe voltages with both nForce and reports as the processor ... and nothing ... (2.8 for the memories, the process for 1.5 and 1.6 for the nForce) I played with these voltages, changing, reading guides, but nothing, the plate is a shit ... do not get another deduction .... to change my power supply for a PFC 500W with dual fan and no change fan, the cpu has a blue orb this processor, reading guides, take you easily to 2600 or even 2700, the actual process is 1800, bios for me because of the damn board, only I could make 2160 MHz (240 fsb to 166 and MEMS), is the most stable being achieved.

I came down to check the processor actually reaches 2700 MHz use it, raised the fsb to take anything less than 290, leaving the ram to 245 and an actual speed of 2697 MHZ ... to my surprise ... Was stable ... simultaneous run 3dmarks 03, 05 and 06, the processor and the CPU score increased from 1500 to 2000 is an 500 points, something remarkable.

So far so good ... This probe around with fear, with far cry and everything, BUT.... Here comes the extraordinarily rare ... Most other games I have ... The strange thing is that as noted above, happens with some games, but not with all that I am at least ... devil may cry 3 also behaves exactly the same ... but the dimensions and, unplayable ...

The strange thing is that the overclock is being effective, it found, because use of the emulator ps2 PCSX2, lei that supports dual core, and the emulator to date is too cpu and therefore requires faster CPUs, you run with Final Fantasy X, and with the support of dual core, between 49 - 56 fps during the game .... BUT ... with the overclock of 2700 MHz CLOCKGEN, the emulator has a pretty significant 52 - 64 fps, FPS, not as fast camera in the other games, these were real fps, no acceleration or anything, so note that the emulator eat enough cpu.

The conclusion that my plate is pretty bad for OC, we can understand, wills not more ... I am going to do ... the board is bad...

As far as I have read, the MSI K8N is very... not anything related to HTT... it that true? The theoretical limit for the bandwidth ... is the only thing I come to read your mind LAA problem.. Memos do not think that is coming source least vga doubt, we may conclude q is the motherboard... I believe it makes it hard

luck with yours...

I tried another bios my mobo and signature probe as 5 bios until a few reached at 250 MHz to 2400 MHz fsb but the process was not starting or 1.7 Vcore by now with another toy with 1.56 q gives the 2400 MHz stable salu2 proof is not proof that rising latencies q may be the mobo low latencies in the case of the camera quickly separate the top spin 2 is optimized to be at the same with sometimes rare in the U.S. Open I was going to split the high filter set at night or the next day.

If you tell that I forgot to put something related to HTT, but I am aware that it can not pass the 1000 (actually 2000, but are multiplied by 2 so it is the same), to pass 250 fsb have to be 3x, in fact I've even tried lower and nothing ...

I played with the memos also with latencies ... but getting exactly the same result, and for the BIOS, tell you that my motherboard came in version 1.6, I updated to 1.7 and then to 1.8, with identical results ... no improvement ....

Concerning the problem of clocked ... increasingly less.... I do not understand because if you overclock get in some games...

Thanks to the 2 in any case and hopefully will continue and may reach something...