Now, we are on the sides ... First of all forget about what many filters by using the PC stays locked ... in any case the game would be encouraged, but nothing more.

On the other hand, the truth can not use that program Bit comment, although I doubt that is the case and you have 1 GB, besides myself playing things down and I have no problems ... in any case, you've tried playing with the program closed?

I think your problem may be due to 2 reasons: high-temperature, whether the micro, the card ... or both, to temperatures reaching your computer when you play? source of power, although x800gto2 do not consume much energy it is likely that your source is not of width to work with and that is TT ... if you could send a screenshot of the voltages that you idle in this respect they are in full would be nice.

To do this you need 2 programs: Everest (you go to computer and from there to the sensor) and the program (taken from here), which serves to stress the vga making the full source to work.

This will be discarded if the source or not ... and you check that your CPU temperature reaches card.

Good luck and tell us how you went...

Source is difficult because I see a verification of 1.2%= pc is mine the difference in my mobo is the DFI, vga mine is R480.

In any case, the DFI spends most voltage source it out for the reason the pc equivalent and low voltage variations that have.

In my process is maintained at 24 and 33 is not full, the vga on a 33 full and does not pass the line 65... X 12 V always between 11.71 and 11, 40 but now between TASE 10.50 ~ 10.43... And I think if played without bit comment ... but I do not remember the results.

The course you must change because it is practically new ... And seeing as the voltages you say that this is ugly ... 10.50 ~ 10.43 voltages are not striving to be the source or when it is required?