Thread: Performance Videos

Hello forum members!
During the change of memory performance revealed some features of video games.

Configuration: percent. E8500, GTX 295 Graphics Card, MP P5Q3 Deluxe, (high settings).

Originally used Hynix memory 1066 2 * 2 GB, in many places, the game clearly and even hangs in the 1-2sek. On solving 1600h1050.

Then replacement for DOMINATOR memory Hynix 2 * 2 GB 1800 MHz (memory worked at the standard 1066), every braking not to mention gone clean.

Although, as a rule, it is alleged that the memory of everything is not affected. But it is not the point. Timing Hynix 7-7-7-20, and the timing DOMINATORA 8-8-8-24.

Could there be a substantial reduction in timing DOMINATORA from the fact that the modules worked at max. Frequency, and at 1333MHz? With the exchange rate and increased as a consequence, ceased "brake."

Are you sure that the reason for the disappearance of "braking" was the replacement of memory modules, while maintaining the same volume? And I - no. You describe the situation typical for a shortage of memory or "Friesians" card due to overheating. You are in the computer, train some moved, and improved air circulation ... Or the second option - the BIOS has been exposed as something in terms of timing, when replacing the modules you changed the settings to more natural. In any case, many tests (and not only our) show that the situation described by you on the healthy systems do not happen.

The simplest version - one of the modules you Hynix were not inserted until the end, and new modules for you to insert correctly.

In about the cooling on the case of 4-e cooler, 2-a clear broach through the body 140 and two laterally placed on the injection, I do not think that overheating.

Earlier was the case in the same Crises sailed or blend textures, black stripe on the screen. Unplug the video cable, and then put into place and everything stopped.

Before playing the game and put windows and just for interest ...... Test should be run.... but because of the memory or the memory settings are not correct, as a rule the image on the monitor hangs...

I thank the participants of the forum for answers.

Maybe even something that hampered the system memory as its standard PC-8500 (which if I am not mistaken 800MHz), while the whole system worked steadily on, with the capacity of 1333MHz.

In general, no longer important - put DOMINATOR (RS-14400) and is OK, not freezes, and does not pull, without overclocking the truth to the full potential of the memory is not used, but is steadily working at 1333MHz - quite enough.