In hardware components are equipped with so many resources that it is almost impossible not to overclock their system, current processors like the Core i7 2600K or 2500K invite literally off the bat. One solution would be a complete water cooling, as it offers as Corsair, for a few years experience you have here, and improved from version to version, we looked at her latest work, the Corsair Hydro Series H100 accurate.
Corsair Link Digital is not included, this is required to run fans and lights on the connections on the radiator can therefore, the two fans are not on the radiator, but directly connected to the board or a dedicated fan controller.
From packaging ago it has remained true to the layout, which is important for the recognition of the product, so you can quickly assign the box to the appropriate manufacturer. Inside, everything is again well packed and protected from damage, in addition to a manual one still finds the necessary mounting kit for current socket types.
The first series of the hydro-cooler Corsair were still around, and smaller, recall and the H70, which looks visually completely, but the assembly has been simplified considerably, this was one of the major points of criticism of the old versions. In the cooler itself will be lit areas and a small button in the middle thus, the power is controlled manually in three stages, side one finds the fan connectors that will work but only with the optional control of Corsair.
Here we have a direct comparison with the older H70 and H100 with the current, as you can see, the dual-radiator is much slimmer, he must be, because it is usually mounted in the housing above, where the space is very limited above all, you have the strength nor the two fans expect her to do so also on the cooler itself you can see the changes well.
The fans have become much better, also a criticism of the old series, the old fans are smaller and thinner fan blades to detect visually immediately thus, the power and volume of new fans could be improved, the maximum power is positive at 2500 rev / min and 92 CFM, not just the best values, but 50% more efficient than the old series.