Thread: 4GB KINGSTON DDR2 HyperX

I have received a mail from APP that these reports offer (€ 49) [url] 2x2g). php [/ url]

Right now, my signature on it, and what my limits are memorias.Me OC worth the change or to expect me to fall more?

Do not rush me is the truth, but if you think a good offer I will order tomorrow.

More casualties No, do not expect to fall over, are in fact very cheap. By the way, are you sure you limit your OC is the RAM? Put a 5600 + at 3.2 GHz is not child's play to that processor.

Temperatures not walk enough about the truth. Aunque el disipador no es un lujo , en Idle 30-35 y en Load no llega a 50. Although the cooler is not a luxury, at 30-35 Idle and Load does not reach 50.
Llegué a 3'3 pero era inestable , pero unas Value RAM a 854 ya es bastante.Voltaje aun tengo margen de subida.Por descarte es lo que hay, o algo más? I got to 3.3 but was unstable, but some Value RAM to 854 and even I was bastante.Voltaje margin subida.Por discard what is there, or something else?

Pues si dices que buenas mañana las encargo.Dudaba por el tema de las latencias, CL5 ya son estas.Lo único que son de 1066. Because if you say good morning to the theme of the encargo.Dudaba latencies, and CL5 are estas.Lo are only 1066.

También que seguramente en verano cambie todo el pc.Esa es otra duda por la cual no voy de cabeza. Also that summer will change all pc.Esa is another question for which I am not going to head.

Cas5 to 1066 memos about 4GB is the most normal.

Given that normally must be in the € 52 offer is a brief, he. The price of RAM is really low, I do not know if it will last for 1 month, 2 or more. The logical thing is to begin to rise slightly in a couple of months.

Think about whether or not you need to do and change, whether it will be to DDR2 or DDR3, I tell you because you are very tempted with the Phnom X4 II (DDR3 and that for them is just a 5% improvement).

And more than tempted, compared to mine that has to be glory and hold pasta loco. xD

Rojas 5%, I see it when they leave the Black and the new chipset, another rooster crows fixed.

Then Pail, ask the fixed, no my board is not going to get the 1066, but the range of OC will be higher.

Buenas.Estos days I've been watching some things and I have some doubts emerged.

He mirado en la pagina de Gigabyte, y pone que mi placa solo soporta hasta DDR2 800: I have looked at the Gigabyte website and put my board only supports up to DDR2 800:

Memoria Memory

* 4 zócalos DDR2 DIMM (soportan hasta 16GB de memoria)(Nota 1) 4 * DDR2 DIMM sockets (supports up to 16GB memory) (Note 1)
* Soporta 1.8V DDR2 DIMMs * Supports 1.8V DDR2 DIMMs
* Soporta dual channel DDR2 800/667/533/400 DIMMs * Supports dual channel DDR2 800/667/533/400 DIMMs

Las preguntas son estas: The questions are these:

Tendré que subir el voltaje en la bios para que funcionen correctamente? I'll have to raise the voltage in the bios to work properly?

Ahora que paso de 2Gb a 4Gb , me recomedais que tire por el XP 64? Now that 2Gb to 4Gb step, I recomedais to pull the XP 64? Tengo una copia por aqui , y como todavia no lo probé no sé. I have a copy here, and have not tried it I do not know.

Podria mezclar la Value Ram y las HyperX? Value can mix and HyperX Ram? O tendré problemas? Or have problems? Así tendria 6 Gb, pero como el tema de los voltajes y la velocidad es distinto supongo que no podria. So you have 6 GB, but as the subject of voltage and speed is different I suppose that it could not.

Para el futuro cambio valdrían bien las memorias? To change the future well worth the memories? Porque lei que AMD va a descatalogar los Phenom II con el socket AM2+, para que sean todos AM3.Por lo tanto las memorias deberian ser DDR3 , no? Because I read that you are out of the AMD Phenom II with the AM2 + socket, so that they are all AM3.Por so the DDR3 memory should be, no?

Saludos y gracias anticipadas Greetings and thanks in advance

No response? xD No hurry to reach me tomorrow, but if I would like clarification on whether there is any doubt over.

Good.

Were already made, and the thing is this:
Voltage: 2.0 V
I gave it manually trimming to 5-5-5-15, 5-5-5-18 came standard.
Endured half an hour of Ortho’s, and it stopped me. There were no errors.

I play something else? I can answer the questions above?

I would say that you have the RAM to 856 MHz; it is not read very well catch you post.

Half an hour Ortho’s is not really any time. To be as safe as possible, what are his 24 hours of continuous Ortho’s?

If your motherboard does not support DDR2-1066, to reach the speed of RAM you should do so through over clock.

Because if you can move to OC, and there we still giving this.

Are 856, yes? Why that is the OC had the other.

Tell me things that I day .Unique not playing and you want to squeeze the Demas ado .Parquet the PC is 24 / 7 and is not flat and squeeze risk.

The timing or do I leave and 5-5-5-18?


Regarding the questions:


Now that 2 GB to 4 GB step, I recommenders to pull the XP 64?

Value can mix and HyperX Ram? Or have problems?

Greetings and thanks