the new Utgard looks quite technical, which is probably mainly because that was abandoned all curves. Corners and edges dominate the appearance. If you are in the housing market a little look around, you will notice that the new Utgard seems to have quite a lot of relatives, which, though not equal 100% - but some are quite similar anyway. Front and top are shaped by the now customary mesh structure. The top sheet Duct quite a big fan, under which the standard 170mm fan hidden. Up ahead is a small area which can be used to store various items.

Name: Xigmatek Utgard Gaming Case.jpg Views: 179 Size: 57.7 KB

One should be careful but something to make you leave with sharp objects are no scratches in the plastic surface. The front is a sea of mesh. Here are nine 5.25 "bays, which all have a uniform mesh structure. One is a 3.5 inch adapter provided with, which consists of optical point looks a little out of place, at the latest after the installation of a drive but can be removed. Who still uses a 3.5 inch device, but also any case, be grateful about this opportunity.

Something is broken up by the whole thing held in aluminum Xigmatek logo, which adorns the middle of the 9 panels. Since it was mounted directly on the screen, one can thus determine the position itself - or even do without also use some. The I / O port is angled at the top and flaunts a very good functionality. Except for Firewire good it gets in the exuberant scale. In addition to power and reset switch, headphone and microphone jack, there are four USB 2.0 ports with sufficient distance from each other. Furthermore, it offers two eSATA ports and two knobs for fan esterification. One per controller can connect up to three fans and shared control.