Thread: Internet Connect

I have a internet on my notebook with me q modem my ISP gave q is for a single PC. Buy a Zyxel wireless modem and I want to connect to internet my PC desktop to the notebook used in modem again. How I can configure?

If you want to do it with the new modem as that which you should connect the cables, configure it as it as before and I guess that is a key provider .Quietly you could make a call to the supplier and then mention that you are unable to connect to the Internet will make you some simple steps to ping such and such then enter the modem will tell you making him a ping via your browser will tell you how to configure generalizable by default until you get to that key or owner who is your provider to get online and ready.

Normally to enter your router settings by doing the following is connected by cable to the pc.2 nd write this address in your browser as I write: 192.168.1.1 Once you exit the router configuration window will ask for a user name and password, you put in both cases the word ADMIN, once inside the router setup wizard that will find the option is being able to set up wizard.

I already did that now the model turns on the light that says internet not before to is a step .But does not connect to internet .

You say you do not connect to internet but not wired LAN or Wi-Fi?LAN cable if you connect via Wi-Fi but do not connect logically. You have to put on the desktop PC Wi-Fi connector, a piece similar to a flash drive that is put into a USB port and is what connects you to the Wi-Fi router. Wi-Fi transmitter that you can find at any computer store and is priced from 10 € per model.

The modem is wifi As I connect via a cable. My idea is that the modem is connected to the desktop PC and wifi connection there so you can connect my notebook.

But connect the modem to the PC I put 192.168.1.1 and begin to set but then not connecting.

Do not tell me if you have cable internet connection or not.

Not with this modem. I can only access the Internet when I use another modem .

This will make it there will be a console windows, write it below the cursor, the command configure / all and then enter, you will get a list of settings, find the part that says DNS servers, usually 2, copy them on a sheet not forgetting or failing the notepad .

Turn off the computer, connect the new modem, you enter Windows normally go to My Network Places -> right click properties -> Loca Area Connection, right click properties -> in this new picture, looking for TCP / IP Double click on it or otherwise mark and property -> true in a third box where to put the IP manually and eventually the DNS servers and place them as they accept.