Thread: Ineffective to connect with Cisco WLC 5508

Well later on that instructing the all thing I required to tell you that you should utilize rule established choice and you should not use NDG instead than that of the IP address of the AAA client. Since NDG will not operate at all and I guess it will see for the policy. Also tell me if you had included radius server to WLC and WLAN with shared secret? Do you have included WLC to radius server

You should easy operate debug client < mac address>. It will permit you to recognize interaction among WLC and AAA server which you are utilize.

Tell me if you are utilize WZC? If so than native windows supplicant is guessed to send username/password which is going to be utilized to login to password while you have not observed about to do so. By utilize IntelProset you will be capable to set username which guessed to supplicant send to AAA. Well I am questioning that the reply beginning from supplicant and it will begin to ask the radius server. You should easy check the ACS server and let me recognize about the similar.

As far as I recognize SecureWireless Access serv is invalided. Well to fix the similar you will require to make latest Service Selection Rule and point the similar to SecureWireless. Once finish you have to utilize the rule based choice for the SecureWireless and select NDG or NAS IP Address from the WLC of yours. later that you should easy utilize the Deminternal in order to identify yours source. You should do the similar appropriate so ACS will be able to differentiate among policy and SecureWireless.