Thread: 7300 GT problems

Is the little problem I have a 7300GT but the XP detects it as 7600GS me, when you start the PC it tells me 7300GT, I tried all the care of the older drivers from 91.xx to 162.21 last.

The other is when OC (5.05.38.00 nTune) after reboot the changes are lost and has to reconfigure.

You may have been flashed for the performance of a 7600GS, the 7300GT is that MSI could be 7600gs, so it may be that, and did not take the trouble to change the name of the boot plate. Or just bad drivers detected because the 7300GT use the same chip that the 7600GS.

Greetings.

Ok, thanks.

Any idea me save changes to GPU (Core - Memory bus) at reboot the machine to become the factory.

Hello

NTune that is not very good for overclok took quire rivatuner if you keep your AC, bios when starting windows.

Hi

Check the program, there is an option out there that indicates that the changes are loaded when Windows starts.

Good luck.

I was trying and if I save the profile changes, the only drama is limited to 525 MHz core clock, and with nTune I came up to 550 MHz without any problems, you need some to change the limit?