Thread: ATI Radeon 4850 graphics card

There is a desire for high-performance graphics card with minimum noise. Inclined to choose.

Plan to install in the ASCOT 6AR6 with the replacement of staff in the less noisy fans.

How big a risk to get the result overheated graphics card?

In general, everything should be fine, but there is a "folk methods" accurate installation of the radiator on the card (you can put on a buckle).

For information without an active cooling card for 10 minutes to 101 degrees. Installing the fan on the side of the hull 3 inches from the radiator did not give anything (I never understood why). As a result, the fan 8 * 8 * 5v was suspended to a radiator, the temperature of 86 degrees maximum in synthetic tests, the toys less.

As a result, virtually silent graphics card, but the active cooling, unfortunately, necessary.

Rejoice, if you want / need you can easily change or extra fan, and do not rack their brains to replace the standard turbines.

There is the same 120mm fan blows to one side (half of the flow is from top graphics, the other bottom-blowing radiator) at 600 revolutions.