Nvidia Geforce GTX 275 is a very attractive graphics card located somewhere among GTX 260 as well as GTX 285. It bundle all 240 shader processors presently like the GTX 285 but it arrive with 896MB of memory like the GTX 260. Thanks to GT200’s high operating speeds as well as the truth that it has been assemble in 55nm, the GTX 275 is significantly quicker than the GTX 260. This card will contend with Radeon HD 4890 1GB and while it beats it performance-wise, it is a bit exclusive. If you’re looking for a gaming card at a reasonable value, then stay with us as well as see what Inno3D has in store for you.

Inno3D GTX 275 Overclock graphics card has been pre-overclocked as well as runs at 700MHz core, balance to the mention design speed of 633MHz. Of course, higher clocks mean superior pricing but Inno3D made sure to reimburse for that with two games – Company of Heroes (Opposing Fronts) as well as Warmonger (Operation: Downtown Destruction). Shaders have been overclocked from reference 1404MHz to 1500MHz with the memory got a boost from reference 1134MHz to 1210MHz.

The GTX 275 Overclock pursue the P897 design as well as comes with reference cooling which is indistinct when in 2D and while it gets louder in 3D it’s still not too noisy. The subsequent photo shows Inno3D GF-GTX275-DUAL-DVI-HDTV-HDMI-GDDR3-896MB N276-1DDD-H3IYX PCI-Express card.

The card is double slot as well as a superior thing about the cooling is that it pushes hot air outside of the casing. The fan is at the end of the card and it arrogantly bears the given name Inno3D Overclock.

The GTX 275’s core packs grave possible, as well as Inno3D harnessed it well and pushed the clocks way on top of the GTX 285’s. Additional overclocking is of course possible, but we’d advice against it due to the guarantee. Core temperatures have risen considerably during our testing with some concentrated gaming pushed it to 90°C while inactive mode resulted in only 38°C.

When the graphics card is inactive, the card down clocks to 300MHz core, 601MHz shader s and 100MHz for the memory. Such process mode enables power saving – our test system consumed fewer than 100W in inactive as well as up to 376W during gaming. Thanks to the GT200 55nm chip on the GTX 275, consumption stays in satisfactory limits, even lesser than on the GTX 280. Maximum idle TDP goes up to 219W as the card has two 6-pin power connectors.

Power connectors are positioned on the common mark towards the end of the card next to the white audio-in connector, which you’ll make use of to bring noise to the card through the provided SPDIF audio cable. Such a shift will allow routing mutually audio as well as video to your HDTV via a single cable; or else you’d be fixed with video only.

Name: GTX275_card_a2 (Custom).jpg Views: 344 Size: 28.6 KB

The reverse side of the card features two dual-link DVI connectors with support for monitors with resolutions up to 2560x1600. The connectors are gold plated as well as if you occur to require a DVI-to-VGA or HDMI adapters; Inno3D integrated them in the box. The corporation also opted to make use of HDTV out on their card, which amazing is not set up on the mention design.

In case you’re longing grave sap, Inno3D GTX 275 Overclock can be chained with one more two GTX 275 cards as well as the SLI connectors are located on their typical locations.

The graphics card’s PCB is green as well as all the Hynix H5RS5223CFR-N2C memory modules are positioned on the frontage side of the card, around the GPU. The card we experienced has 896MB of GDDR3 memory, but if that doesn’t hit your chord Inno3D present the GTX 275 with 1792MB of GDDR3 also.

Apart from the two gift games, the packaging contains:

- The Graphics card
- Documentation + driver CD
- DVI Adapter + HDMI Adapter
- PCI-Express power cable
- TV out cables
- SPDIF cable
- Company of Heroes + Warmonger
- Nvidia’s 20% off voucher for Mirror's Edge