Thread: Oc In your GPU memories

That shows the oc, but is stable, no artifacts or flaws.

I have 20-20% with flasheo.

Leave their plate and valuables.

Greetings.

More or less similar to the previous comment is true for the guide apart flashes know after I unlock the card.

Good to get all the juice as possible to 6200.

I'm not overclock the vga so I voted 0, but the overclocked VGA sítenía I used. 46% and 45% of core memory, or 41% and 51% of core memory, it was 365/580 or 350/608 as the source of power or voltages of the driver vga was not to maintain the high 2 items - / / - + Riva Tuner Bios ID customized to Extreme Edition + customized drivers.

That 9550 race was felt, 81%. What a pity that today is limited, therefore, they both a 6200 upset that they have to lock it? I am not referring to the pipes, it also hurts me, and I mean that no change of bios, there is any way to climb 1MHz.

Greetings.

I have a Geforce 7100 gs

I gave it two 3 cm above the sink, he rose from 350 to 460 clock and memory to 800 and does not rise from 51 º c

Not if you can raise more, but also goes well ... improvement in the games is pretty ... about 10 fps

I flashier my 8600M GT and I check and retrieve me the steps to remember and write without monitor ... I was going through terrible the OC... Now I risk it and use atitool and zero drama.

There are people who make sense of duty: P.. often happened that people were going to hand such as its overclocked 9800Pro XT to spend time the card is starting to hang up and gradually and not even bear the manufactures watches, so we were forced to underclock not to Artifacts them out.

What to look for more performance in a factory 8800Ultra OC? (Not true answer for more points in 3dmark). At least for a few years you will not need to worry about the performance of the 8800Ultra.

My plate right now is locked to the OC.... these are the consequences of buying a PC in-store ... but we are going to do....

Now within a month I go around with the P35 gigabyte dsl3 a 8800 GT ... ....... 2160 2GB Musker and hope to get that OC art…

In my Sapphire Ati Radeon HD 3850 with Zelman VF900Cu, I got on the clock of 669 MHz and 743 in the memos of 829 MHz to 1059 MHz, Temp 34 °.

The truth is that I'm killing my 8800GT; I have a LAN Party board with an 790FX-M2R Phenom 9600 without OC (not required) and VGA when I hit a cut in Crises, but all good.

To demonstrate that the G92 has the force to this temperature?

Same with the 3850.

Upload one of the core voltages to 0.05v to that 8800GT, but you'll require a lot about the core of the MOSFETs and VGA.

Greetings and congratulations.

I had my vga the well overclocked my 9600gt sonic ex.

core: 700 @ 850MHz = 21% +
Memos: 2000 @ 2100MHz = +5%
shader: 2100MHz @ 1850 = +13%

It came with the vga oc factory, which is the maximum I could get the vga, now when the hd4850 vga soon gives this.