Thread: Display problem on Sapphire HD6870

Hello, one thing concerns me first, the CPU frequency to 1200 MHz seems very low, the Intel Pentium E5300 is clocked at 2.6 Ghz normally 2600 Mhz, it should already ensure that these are the true frequency of the processor and not a frequency of "rest" (speedstep technology. Check the BIOS settings are good processors about the "artifacts" that appear on the screen from time to time, pourrait be a hardware fault i say "pourrait" because there are many possible reasons for this failure.

I completely invalidate service by entire woods and then remove earlier setup software with various register app and registry, extending to appear approximately, the just post I determine spoke of memory trouble, i tried out with memtest is ok and I still turned on a one barrette, 1GB and not ever in the similar location of memory slot and auncune improvement on that side. In many post, this trouble looks later foresightful utilisation or on maps that have so soon been served or is overclocked, cadaver the solution of a constructing defect service and return.

Hello, so we need an ultimate solution that has worked for me with a brand new nVidia card that just kept crashing my PC even after reinstalling the drivers, carefully record all settings in the BIOS; perform a "clear CMOS" of the PC; restart the PC and redo the settings in the BIOS, start Windows.

I have seen the problem, so that the video card runs well, I had the underclock basically lower the frequency lower than intended, some cards are made by optimizing the model parameters weaker, others the reverse is true, it's a matter of luck what.