Thread: Samsung HD103UJ (1Tb)

Good day!
I bought two HDD SAMSUNG HD103UJ (to 1Tb each) and asked to place them in a Raid 1 (parallel to the recording of information). Two days ago, was in the system tray constantly appearing (and disappearing) Prevention failure device console - he draws two HDD, united in a raid (one red flashes) and writes: "An error message to read or write to your hard drive." Despite this, the system is working like normal. When you boot your PC, when a HDD, it was not possible to determine the condition / status. Prompt, how critical it is and what should I do? carry in warranty, two HDD? Maybe you can remotely resolve the problem, once the system is working?

Here is a detailed from Intel Matrix Storage Console:


System Information

A complete set: 7.5.0.1017
The history of the installation kit: 7.5.0.1017
Shell Version: 7.5.0.1017

OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 2 Build 2600
System Name: FROLOV-DESKTOP
Model System: Maximus Extreme
Processor: Processor Intel Pentium III Xeon ~ 3216 MHz
Language: RUS


Intel (R) RAID Technology

RAID-controller Intel: Intel (R) ICH8R/ICH9R SATA RAID Controller
The number of ports of Serial ATA: 6

Version ROM RAID Option: 7.5.0.1017
Driver Version: 7.5.0.1017
Version plug RAID: 7.5.0.1017
The file version is language resource plug RAID: 7.5.0.1017
Version creation wizard volumes: 7.5.0.1017
The file version is language resource creation wizard volumes: 7.5.0.1017
Version creation wizard from an existing disk volume: 7.5.0.1017
The file version is language resource creation wizard volumes from the existing hard disk: 7.5.0.1017
Version of the master volume changes: 7.5.0.1017
The file version is language resource master volume changes: 7.5.0.1017
Version Removal Wizard volume: 7.5.0.1017
The file version is the removal of language resource master volume: 7.5.0.1017
Library version ISDI: 7.5.0.1017
The file version is the language of warning users of the resource monitor events: 7.5.0.1017
The monitor version of events: 7.5.0.1017

Array_0000
Status: No active migration
Cache reverse the hard drive is included: Yes
Size: 1863 GB
Free Space: 0 GB
Number of discs: 2
Disk party 1: SAMSUNG HD103UJ
Disk Party 2: SAMSUNG HD103UJ
Number of volumes: 1
Volume Party 1: Volume0

Volume0
System Volume: Yes
On the back of the cache record volume: None
RAID-level: RAID 0 (alternating)
The size of the band: 128 Kb
Size: 1863 GB
Physical Sector Size (bytes): 512
Logical sector size (bytes): 512
Number of discs: 2
Disk party 1: SAMSUNG HD103UJ
Disk Party 2: SAMSUNG HD103UJ
Main body: Array_0000

Hard disk 0
Usage: Participant array
Status: An error has occurred
Port facilities: 15968304
Location of port devices: Internal
Current transfer mode serial ATA: Generation 2
Model: SAMSUNG HD103UJ
Serial Number: S13PJ1NQ207220
Firmware: 1AA01108
Carry out the query support: Yes
Cache reverse the hard drive is included: Yes
Size: 931.5 GB
Physical Sector Size (bytes): 512
Logical sector size (bytes): 512
Number of volumes: 1
Volume Party 1: Volume0
Main body: Array_0000

Hard disk 1
Usage: Participant array
Status: Normal
Port facilities: 15978600
Location of port devices: Internal
Current transfer mode serial ATA: Generation 2
Model: SAMSUNG HD103UJ
Serial Number: S13PJ1NQ207219
Firmware: 1AA01108
Carry out the query support: Yes
Cache reverse the hard drive is included: Yes
Size: 931.5 GB
Physical Sector Size (bytes): 512
Logical sector size (bytes): 512
Number of volumes: 1
Volume Party 1: Volume0
Main body: Array_0000

Unused Port 0:
Port facilities: 15967608
Location of port devices: Internal

Unused Port 1:
Port facilities: 15967608
Location of port devices: Internal

Unused Port 2:
Port facilities: 15967608
Location of port devices: Internal

Unused Port 3:
Port facilities: 15967608
Location of port devices: Internal

Bring the system unit entirely, it seems, you have the replacement of one of the HDD to be.

Good day!

I wrote a little bit not correct - I have a raid 0 (no mirror).

BIOS on boot disk write opposite 1go Error Occurred (0), opposite the 2nd says "Member array raid0".

This is exactly the same problem cured reshuffle RAID-array:

Is it possible to rebuild the RAID0 without losing data? If so, how?

We are grateful.