Thread: Samsung HD502Ij driver

Hello,

I have a problem here: I bought the screw Samsung HD 502IJ, put to the mother via the PCI-SATA controller St-lab A-173, assigned to the basket like a safe ... screw works as Andropov Collider-strong vibrate (to a certain point the noise begins to show itself). I would like to know this feature of the model, or a defect in the thread? Can cause in the controller or a data cable? Connected screw SATA-cables, complete with controller....

At such a body to sin is not accounted for, I believe that you have some thin-walled. To get started, try the following options:
• Move the disk to another location in the basket;
• adjust the AAM system to reduce noise through

If the shell and will resonate, try temporarily disabling hull fans (if any). If under any tricks vibration is not corrected, this failure is likely to drive, with this once in SC.

Urban Finished command and executable file from the archive, the link that you provided, now the noise of vibration hardly be heard ... (So that the SC does not carry? - In the sense that the noise is not audible, but the vibration is a “Suspicious”- it is not continuous and the “pulse” not" he would have through the months other ....)

Well, if there is any doubt in any case is to contact the service. Through the Forum of the disc can not be diagnosed.

With respect to the vibration you need to understand that every drive has a small vibration, but is manifested clearly in a different form (broken or otherwise) only with the interaction with the shell (a resonance, you know). Just this may be a fortuitous circumstance. To improve vibration isolation can be suspended in a special drive attachment or inner surface of the walls of the shell plates noise material.