We have prepared a case report, but it is an external hard drive enclosure from Manpower, External cases are becoming more popular, so you can be put together as desired external device and not have to buy ready-made components that you do not know or just do not want to have. Then you should look not only at the price, but also to the content, with an external enclosure you can select the hard disk itself, not only the size but also the brand, so it is hardly, if ever, happen that a hard drive with 8 MB of cache in a finished case is to be found.

We use the external enclosure for some time, not only for hard drives, including drives, you may respond to devices like a laptop still die an additional hard drive or burner without having to install it to, prerequisite for this is of course an available USB 2.0 port, without which there can be long delays.

The large aluminum cooling fins on the sides of the case lead from the great heat of the hard drive and allow an almost silent operation of the housing, only the hard disk can be heard, unless it is a very smooth-running model, the blue LED

Name: Mapower HDD External Case.jpg Views: 39 Size: 11.7 KB

function and the elegant aluminum-look in dark-gray creates the perfect combination of functionality and quality appearance.

Highest sympathy and information move speeds via USB 2.0 - interface changing the simple exchange of information with nearly any pc, the power supply takes place via an external power supply, which is located in the delivery of housing.

The technical data are to be explained not so much, the housing is made of aluminum and is no longer cooled, the result is that one has no additional source of noise that would be heard externally even more, you can install hard drives up to 400 GB, according to the manufacturer, Power is supplied via an additional power cable, not USB.

The external case itself is very lightweight and durable. on the back of it the whole connections takes for the cables, an on / off switch is also available, which is safer than the case with the insertion into the socket to start, since the housing has no additional cooling, were mounted for better passive cooling ribs on the side.

Be opened to install the hard disk must be the case, of course, all you need is 4 screws and remove the lid, the frame where the plate is fixed, also can be separately lifted out of the housing, so you have more freedom of movement during installation, with 4 screws, the desired disk is then mounted to the frame.