Roof WiFi Antenna Installation Instructions

Installing a WiFi antenna on roof is like installing any other kind of antenna, with some other things to test. You should take wind, rain, and other factors into account when mounting antenna, and ensure that signal going to antenna is tough enough to send and receive WiFi transmissions. Based on type of antenna you install and what you are using it for, also you should take directionality of signal into account.

Mounting the Hardware

1. When installing an antenna on roof, you must look for a spot on roof that is as high as possible, to permit for maximum signal transmission. You must take care to put antenna away from any other metal objects on roof, or else they will successfully become part of antenna, which will cause a alter in how well the antenna enable to send and receive data. You must also not install an antenna anyplace near electrical power lines, so if power lines run close to or over roof, do not install antenna on that part of roof. The type of roof install you select depends largely on personal preference; you can go with one that you should confirm into roof, or you can connect it to chimney, if you have one. If you must climb up onto roof yourself to install antenna, be sure to take all of needed security precautions so that you do not harm yourself.

Special Considerations

2. When antenna is lastly installed onto roof, you must take few things into concern that would not want to for other kinds of antennas. If you are using antenna to broadcast over long distances, be sure that it is in a place where there is a clear line-of-sight (LOS) to person you are attempting to reach. Based on signal output of antenna, simply make the signal reach several hundred feet, as long as there are no obstacles in the way. Remember that if there is a heavy rainstorm or antenna becomes coated with snow, the signal will be severely corrupted, frequently to the point where you won't be able to send or receive information in any way.