Digital Concept converter drives are tiny thumb drives utilized to send data stored on a digital memory card on PC. Converter drive is attached to a standard USB port on PC with USB cord. Before PC will identify Digital Concept device, proper device drivers should be installed. Digital Concepts converter drives come with a CD-ROM that contains drivers needed for PC to identify converter drive.

Instructions

1. Step 1

Put in CD-ROM that came with Digital Concepts converter drive into CD drive of PC. If Digital Concepts CD-ROM does not mechanically run, open PCs "Start" menu and click on "My Computer."

2. Step 2

Locate CD drive that has Digital Concept CD-ROM on "My Computer" screen. Double click machine icon to run driver set-up.

3. Step 3

Follow Digital Concept set-up screens that show on screen. Most set-up process is automatic and needed drivers will install mechanically.

4. Step 4

Check the progress of driver installation on screen. A message will come out on screen when set-up is finish.

5. Step 5

Check to make sure that drivers were installed properly by connecting Digital Concepts converter drive to PC with USB cord. Connect a memory card into device and wait for PC to identify device. When it does, a small device menu must automatically appear. Choose "Open Folder" option to view contents of memory card.