Putting Batteries in a Wireless Transmitter Mouse

Wireless mouse is power-driven by batteries, and like all batteries, finally they have to be changed. No matter what kind of mouse you contain, there are only two standard ways of opening case. You don't want any tools and can install substitute batteries in seconds.

Instructions

1. Step 1

Among wireless mouse switched off, turn mouse over and see bottom.

2. Step 2

Open the battery section. Few wireless mice, like those created for utilize with Apple products, will have a tiny, flat cover that is flush to rest of bottom of mouse. Push index finger along this cover and slide it to you to remove you. Wireless mice, like those created by Logitech, will have a tiny lever inset into bottom. Utilize fingernail to push lever to the front of mouse and to right. Turn mouse over and slide lower part of body to bottom of mouse and off. There are some brands of wireless mice that will have a tiny screw placed in center of bottom of mouse; utilize a dime to unscrew this, take out it and pull whole bottom off. No matter what brand of mouse you have, now see the battery.

3. Step 3

Taking out battery by pushing one end with tip of your finger and pushing to reverse end and pulling up on battery. Battery will pop out of the section.

4. Step 4

Install the substitute battery by pushing it into battery section until it locks into place. Ensure that positive (+) and negative (-) poles of battery are lined up with positive and negative poles of battery case. The poles will be marked in or near battery case; check markings, align new battery properly and push it into place.

5. Step 5

Substitute the battery section cover.