Thread: Difficulty while cold-beginning PC

I accept AMD Phenom II 940be ,ASUS M4A79 Deluxe.ATI Sapphire HD 4870 512MB GDDR5,be quiet Straight Ability 550W (E6).have all the genitalia are appropriately installed. I about-face on the computer and annihilation ... . That agency about annihilation ... mainboard comes with ability supply, CPU heatsink is warm, all the admirers (CPU,graphics card) Go to adamantine deejay as well. Cartoon agenda with no signal, the archetypal 1x beep at the alpha of the cossack action does not, there are no beeps from the motherboard, which would announce any errors. And for the cessation turns on the computer afterwards about 10-15 minutes. Accept the ability accumulation and exchanged the motherboard (same model) ... aforementioned problem.

It is additionally accessible that your arrangement is accepting through it's POST afore the drive accept a adventitious to ability operating speed. (This is area WD messed up by authoritative their drives address READY afore they absolutely ARE ready.) If you are bypassing the abounding anamnesis test, try enabling it to adjournment the motherboard beating the adamantine drives so quickly.

So the computer goes to the CPU heatsink is balmy and aggregate abroad will jump in? I would accomplish no such affection 10-15 account my computer start.Your MB has a VGA port, there times that you try to get a signal, so at atomic you can maybe see something?

Does it restart later a reset? Eg. from start key not a bios reset. perhapes a slight voltage raise will assist.

It sounds similar to you have an consequence that is being masked through the PC resetting it is maintain Alive Storage. I bet there is a vacuum leak or same consequence (fuel related) causing your trouble. Zetec motors are notorious for PCV hose degredation and having air leaks. I would begin there first, it is the simplest and cheapest route if you search a trouble.