In 32 steps lead iFixit through internal workings of iPad. Weight and components are explained. And it seems according to The Next Web to come to temperature problems.

Apple iPad is most likely the most discussed product so far. The launch in the U.S. was last week in Europe, we must still wait a couple of weeks. We think this is not so bad perhaps, because it allows us to take a look at the findings and experiences of others.

iFixit has a retail iPad bought this once and cut the same. In 32-step, the author Miroslav Djuric one on the inside and finds interesting details. First, the display is removed, leaving a clear view of the flat is on two lithium-polymer battery. First opening is critical, as you cancel few latches. The author notes that the display housing and each weigh about 350 grams - the weight is therefore almost symmetric. Foxlink a USB power adapter is integrated, which delivers up to 10W. This detail describes the Website, all components of the Apple-flounder to over a dozen T4 Torx screws, which fix the display.

Similarly, we found interesting the message of The Next Web, according to which the iPad necessarily in the scorching sun are not used to be. The website refers to Twitter posts of iPod users. Apparently the user in case of overheating is the iPad confronted with an error message: "iPad needs to cool down before you can use it". The article has been gradually supplemented by updates, which asked for the affected user was how it came to this message. Apparently there is a user from Texas, after an hour of this message and was later shown for a half hour operation at high ambient temperature. And indeed, the Apple iPad specified for the temperature range 0-35 ° C. This is not much, but common. Some notebooks would come in our view, in the blazing sun also sweat.