+ Reply to Thread
Results 1 to 8 of 8

Thread: P35 - P45 motherboard

  1. #1
    Alec Stewart is offline Member
    Join Date
    May 2009
    Posts
    71
    Rep Power
    3

    Default P35 - P45 motherboard

    Hello friends,

    Today I will change the way my mother I upgrade a bit (not much!)

    I will draw a neo P35 and then I will put a p45neo.

    My question is if I remove the xp or if you must format and start from scratch?

    It would be a pity since train recently and I have an operating system very clean and tidy.

    The mothers are the same brand, the chipsets are below (P35 to P45 and ICH9 by ICH10), will be necessary?

    Maybe the ants should be shut down and disarm uninstall drivers P35 and mother when the other mother pledge install the drivers from the P45, but do not know.

    Greetings

  2. #2
    Cade Hugue is offline Member
    Join Date
    Apr 2009
    Posts
    97
    Rep Power
    3

    Default

    It is not necessary to change formatting plate..... Just.... the bios configured according to your hardware and then install the chipset driver for the new board.

    Should not do anything else ... and will have no problems with xp.

    Greetings.

  3. #3
    Aubrey854 is offline Member
    Join Date
    Apr 2009
    Posts
    59
    Rep Power
    3

    Default

    That is, only the drivers and will be as if nothing XD. So yes, you're going for a mobo overclock a least a overclock 0.o

    Greetings

  4. #4
    Armando489 is offline Member
    Join Date
    Apr 2009
    Posts
    59
    Rep Power
    3

    Default

    Rare that the 2 previous match Posters something WRONG

    You will have to re install XP is designed not to lift when you switch plate (chip) as well as Windows 2000, provide a blue and re start, did not even let you starting in safe mode, look in google there are several tutorials that show you skip such as Windows Protection
    There is also the option of "repair" with the same disk from which you installed XP.

  5. #5
    Anton985 is offline Member
    Join Date
    Apr 2009
    Posts
    54
    Rep Power
    3

    Default

    I had the P35 neo-f in question and then when I went to the Asus P45 I had no compatibility problem at the chip, the package is reinstalled ICDS (Intel Chipset Device Software) and so far I have not had conflicts. Therefore I write from experience XD.

  6. #6
    andy852 is offline Member
    Join Date
    Apr 2009
    Posts
    63
    Rep Power
    3

    Default

    Exact compatibility is something like the chip is of the same family should have no problem Intel.

    Now if we had a board with chip and want to move to Intel to do it because we could enter failsafe mode but not normally enter.

  7. #7
    carian789 is offline Member
    Join Date
    Apr 2009
    Posts
    64
    Rep Power
    3

    Default

    Not all the time ...
    I gigabytes tube plate with an NVIDIA chipset, and now I have an aces Intel chipset (Q35) was not necessary to train.

  8. #8
    adolf456 is offline Member
    Join Date
    Apr 2009
    Posts
    58
    Rep Power
    3

    Default

    Last try if it works.... And if not.... a format the pc is never wrong.

+ Reply to Thread

Similar Threads

  1. Replies: 0
    Last Post: 08-31-2009, 12:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
SEO by SubmitEdge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48