Hello

The source buddy is fixed if you get enough to climb, because that does not seem to be an fsb.

Hi

No, I think I hang k is 560W, with pc was 480 k... I think something in bios, but not if it will be. And post it to 6x and 7x rather try and upload more let me I do not think a thing of the source...

We need to give more voltage to the board in that case. And see if that. If you should not have any fsb or anything, also try flashing the bios in one of these you can upload more.

That all this memory, with latencies has problems or anything.

Hello

I have a 2x1GB GEIL 4-4-4-12 800MHz flash and you could not do it as explained?

Hello

I do not think is an fsb wall, it would be better to lower the multi and test reports as far shits.

Hello

In this case you have two options, a lower divider as mentioned, that most of the bios is called DRAM Frequency relax the latencies to 5 5 5 15 and raise the voltage a little to the memos is that if required. In any case what is left healthier 1:1 over the CPU?

A screenshot of your bios, it is better for what we can to help lower frequency of the memos because they are running at 400 @ 800.

On the last point many forget this and more while MHz and voltage temperature rises dramatically.

Not including the SPD tab to see the default latencies at different frequencies, but the 400 and any memory can be increased up to 10%.

What you need is to upload a little Vcore and achieve the Bios alternatives have been specified by top-scale ... T º and verifies that these heats the central area, very easy to climb and hence T º jars are unstable.

That fan is in the process?

I need a pork came from a broken but the memories are supposed k 2x1GB 4-4-4-12 at 800MHz and as k can upload say till 1000 with voltages d factory.

Vcore and it's 1175 and in cpuz makes this 1,456 k (now) at 27-30 ° with the sink set. And uploaded it till the Vcore to 1.5 and nothing, and also climbed to 1.7 and the latencies to 5-5-5-15 but nothing.