Installation

Installing memory modules is easy task to many users. In fact no tools are wanted once you opened your case. Take out any presented memory modules, if you are replacing older sticks. If you are upgrading you can basically just open both levers on DDR slots line up the keyed slot and definitely insert module into memory bank.

If you plan to make use of dual channel ensure that you insert stick in same colored bank. Once you have memory banks installed you can boot up system and test bios settings to see if latencies are set to following CAS 2.5, TRCD 2, TRP 2, TRAS 5 also set 1T Bank Interleave.

Here you can notice mirror end really well. The sticks look remarkable. The only irritation is that they simply pick up your fingerprints.

Overclocking

Overclocking is actually what these Ultra X sticks are intended for. They have all potential to push your system to new limits in performance but to obtain most out of the system; you should have hardware capable of giving needed voltages to memory. Otherwise you could change components to give extra voltages. Most motherboards are designed to run 3.0v 3.2v and some up to 3.8v, which is also max one can get with an OCZ DDR Booster on certain motherboards, test motherboard specifications to notice if it has high sufficient voltage options for you or test to notice if DDR booster is well-suited before if you plan to obtain into maximum performance out of memory.