Thread: Motherboard and memory

My motherboard and my memory do not get along. Occasional blue screen and even sometimes not I turn on my computer. If I install only two banks seems that things are going well, however with 4 nothing, no way. I updated the bios to the latest version and the thing does not improve.

Solution, change the memory but I cannot catch them not give me problems. I looked at the supported memory list and it is very difficult to find those exact modules. Anyone knows what memories I can do well and which 8GB are and I have so far.

I will not if the reports sometimes with 4 modules instabilities occur raise your test point voltage to the memory and north bridge.

Give a point to the north bridge voltage and memos as stated water dark.

As you can see I have everything in order, however looking at the label of the modules look like sets, then I will try and manually got the DRAM Voltage to 2.100V and the others left by car. This I had so for a great season and still a blue screen. I do not know if it would also change the other options?

If the manufacturers of the reports say they are going to 2.1 volts, you should put that value, if you let him drive again, you have to do the same operation again.

It will also discuss peer, is to upload a little NB voltage at socket 775 boards with 4 modules, and is very common to have to do it. To test whether this is the problem, remove two modules for a couple of days.

Then again put 2.1V, why certain termination and DRAM Channel A and B reference the car I leave? Joer, this had to come somewhere specified.

The rest will leave by car, although the lower voltage is always better, is a matter of trial and error, if the reports will work perfectly to 2 volts or less, have less heat and use.

Nothing any way. I've uploaded a point, even two, and nothing. Fails to boot the bios. And the windows are not because these days format again and, with only two modules running smoothly.

It may be that the board accepts only two modules working at 1066MHz, on my plate that if AMD had that limitation was

I taste what frequency. Me as strange is that so far the computer is sometimes hung me but not now turn to the four modules.

Have you checked that all 4 modules are well, Pass the mentest separately to each of them, not a bad idea.