Make a wired network in home by running Cat-5 cable from walls. Cabled networks enable making a home network that spans multiple rooms or grounds. Wall plates and RJ-45 jacks look same as phone jacks. By connecting a Cat-5 cable to the jack, can also connect a router or PC to the network. Cabled networks don't have the same flexibility of wireless networks, but they are more dependable.

• Create a uneven draw round scheduled the wall.

• Step 2

Fix the box firmly.

• Step 3

A lot of boxes have holes on both ends as well as at the back side. Remove tough holes. Slide Cat-5 cable from the hole, place the box and screw it.

• Step 4

Put the RJ-45 jack in the wall plate. This must be done prior connecting the wire to the jack.

• Step 5

Strip 1 inch from the Cat-5 cable. Split and undo all cables.

• Step 6

Slide all cable in its appropriate color socket. Press all cable in to protect slipping.

• Step 7

Punch the cables in place. Push the equipment down till the tool is flush with the white ends of the jack. All cables should stick out slightly to prevent slipping after the jack is in place.

• Step 8

Fix the Cat-5 lead in wall serving dish and then wall portion dish in wall box.