Configuring a Mobile for WiFi Data Transfer to computer

Setting up a steady Wi-Fi connection between mobile and commuter enables transferring information from phone to computer. This needs a little technical knowledge and a means of connecting mobile to computer like USB sync cable or Bluetooth. The configuration procedure completes within few minutes with a few detailed instructions to make sure that the connection is steady.

• Attach mobile to computer. Insert mobile device's USB sync cable in phone and computer or connect via Bluetooth. Wait till connection indicator appears.

• Step 2

Launch mobile device's connection settings. Go to "Start" on phone and open phone's network and connection settings.

• Step 3

Select connectivity basis for mobile phone. Select "Wi-Fi", and click "Work" figure Wi-Fi sink menu. Select Wi-Fi network card as defaulting connection source.

• Step 4

Locate IP address of Phone. Click "Use Specific IP Address".

• Step 5

Establish PC's network settings. Click "Wireless Connection/Network Settings/Network and Internet" settings. Go to the available network connection settings.

• Step 6

Key the phone's IP address in PCs Internet Protocol. Under properties wind0ow, a list of installed Internet protocols will be there. Select "Internet Protocol TCP/IP" and enter phone's IP address in the form. Select "OK" to save.