Thread: Operating System Not detected fault at Startup

There are various causes why you may obtain the “Operating System Not detect” fault at start-up. It could be either software or hardware-associated. While this will often spell disaster for most people, there are simple things you can do to fix the fault without having to resort to costly fix shops or missing valuable information.

Earlier you go forward, you will require to gather as much information about the computer as you can. What Operating Systemare you campaigning, what model computer is it, what model hard repel is inside? experiencing these matters will help you get the necessary tools to diagnose and fix the Personal Comouter.

If the hard repel is not assembled properly via the jumpers or cables, you should be capable to assure this in the BIOS. You will require the repel with the Operating System to be the Primary Hard repel. For troubleshooting purposes, you will also require the hard repel configuration adjust to AUTO and listed as the 1st Boot Device in the boot sequence department.



If the hard repel does not show up, attempt changing the power connector and IDE (or SATA) cable. If the hard repel even does not show up, you will require to visit the hard repel manufacturer’s web site for their diagnostic tool. If the repel shows up in BIOS, but you even receive the “Operating System Not detect” fault, you might only require to repair the master boot record.

To do this, you will require an set up disk or boot disk for your Operating System. When you boot to the disk, pursue the prompts until you find the selection for the Recovery Console.