The Vortex Plus is a combination of an aluminum block and aluminum fins and four 6mm copper heat pipes. The heat pipes have this contact with the processor in order to ensure optimal heat dissipation directly.

The Vortex Plus works on the Top-Blow, which means the fan is positioned so that it blows from the top down towards the motherboard. It can be cooled immediately with even the surrounding components on the motherboard through the draft. Moreover, this construction is also very space efficient. At just 84 mm in height, there should be no problems even in small enclosures.

As a fan of the Blade Master 1992 is used. However, as the 1992 already does, these are at a 92 mm fan. Depending on the requirement, the Blade Master 1992 with speeds of 800-2800 U boasts min. Attached as usual, with mounting brackets directly to the cooling fins.

CPU Support:

• Intel Corei7 Extreme/Corei7/Corei5/Corei3/Core 2 Extreme / Core

• 2 Quad / Core 2 Dual / Pentium / Celeron

• AMD Phenom X4/Phenom II II II X3/Phenom X2/Phenom X4/Phenom

• X3/Athlon X4/Athlon II II II X3/Athlon X2/Athlon X2/Athlon/Sempron

Features

• Dimensions: 166 × 100x84mm

Name: Cooler Master Vortex Plus CPU cooler.jpg Views: 28 Size: 17.4 KB

• Weight: 445g

• Cooler Dimension: 116 × 100x58.5mm

• Radiator Material: Aluminum fins / 4 copper heat pipes

• Heat pipe Dimension: 6mm

• Fan Dimension: 92 × 92x25 mm (3.6 × 3.6 × 1 inch)

• Fan speed: 800 - 2800 rpm

• Fan air flow: 15.7 - 54.4 CFM

• Fan Pressure: 0:35 to 4:27 mm H2O

• Durability: 40.000 hours

• Storage: Long Life Sleeve Bearing

• Volume: 17-35 dBA

• Connection: 4 Pin

• Fan control: PWM