Thread: Corsair Graphite Series 600T cabinet

With the 600T Graphite now the third PC case from Corsair comes on the market In contrast to the 600T series Obsidian is down more compact. Like the obsidian cases, the graphite is simple, elegant and black. It has four 5.25 "drive bays and six 3.5" hard drive trays that can be used for 2.5-Drives. The case offers enough room for an ATX motherboard and up to eight cards and slot covers . The faceplate and cover are held in mesh design. Both the 5.25 "aperture and the removable bottom are provided with dust filters against premature dusty of hardware and can be cleaned really easily.

power supply is mounted at the 600T at the bottom of the case. The housing base has air inlets for optimal cooling of the power supply. A filter also ensures that the housing is secured against the suction of dust particles. The dust filter is easily removable and washable. The ventilation system of the 600T is outstanding. Sun rotate behind the front and in the case market with 200 mm fan and the back of a 120 mm fan. Instead of the 200 mm fan either two 120 mm can also be attached. The PCI slot covers at the back of the case are also equipped with ventilation slots provided. The interior of the 600T is kept completely in black. Various rubber pass through to cable management allows a perfectly tidy interior.



This is supported by various cable holder on the back of the whole Mainboard trays and 35 mm space between the side panel and tray. For easy installation of the PC-cooler is a large-sized opening found below the CPU socket on the Mainboard tray. There are two separate hard drive cages, each rotated by 90 °. The upper of the two can be removed to allow the installation of graphics cards with a length of up to 480 mm in length. Cage are still proud 350 mm. The vast interior has room for a large system and 8 PCI expansion shields enables 600T in the use of multi-GPU configurations.