Thread: Help with c gigabyte i7-950 udr3r

The option must be where CPU settings, I have a gigabyte but must be where speedstep and C1E also C-state, I called HT Technology, it gets disabled.

I pine a little turbo c as you see that with these temps? Tocr must be something else? Esque fatal beo what the temps .

As for that OC should not even get more than 1.10 V, even in good CPU may be less, although the impact plate, I have two Asus and a D0 920 and makes 200x21 with 1.25 v and I have another 920 C1 does 3800 with that voltage, but should suffice to 200x18 with 1.10 or 1.12 v, then if the temperature is carefully unloaded and exchange it would have a good heatsink, if it loaded Linx is not bad, but if HT low voltage and remove the temperature will go down.

Try 1.15 and see but you see put down, Load Line active calibration, so that voltage really need. I think first you should read some guides if you have not already, anyway have a look at this enlace. It has a table that came to me very well.

Well not that easy that is not stable, I tell you how often you had to think it was 200x18, 200x20 for 1.25 you should from v and going down to see with what endures.