Thread: Please assist with Bios settings

You just need the bios to sata mode see, this is just stelt IDE / Native IDE to AHCI, unfortunately biostar boards are cheap boards, your board has not at the setting.

The heist, all the devices that are angeschlossen on sata port in IDE mode run. which is not quite as good ssd for ne, since you thus can not use the full speed, is Measured the TRIM command is not set, and you müsstes automatic defragmentation for the SSD manually disable.

Thanks for the attempt you have made yourself and for the beginning words shall probable then can the council with a several board verfolgen afterwards i recognize that if the latest board has such a circumstance alternative, or are there any keywords to appear out for me one more time, many thanks.

The standard supports the BIOS version of the N68 south Biostar no AHCI, so far we have already, but it should to my knowledge, a driver is available, which can be used to patch it-later the site helps me now and going well they would have a Windows 7 driver for AHCI be available for your MB,otherwise just googled.

Hence, most MB's now a days fresher models so soon have AHCI, if there are doubts, easy contact the producer or seller and then explicitly queries whether the BIOS affirm AHCI edition!

Which gives referable cpu precisely unfortunately, there are circuit card with AM2 + socket is not in reality fresh any longer only utilized on ebay what would become would be as improve as any for the socket AM3 micro ATX board, but still then you necessitate latest in-memory, since the boards will only affirm DDR3 memory.


Still so if you have left, you can also switch to a present intel pentium G630, a asrock board with chip and B75 2x2 gb kingston ddr3 ram, afterwards the all machine would be quicker than any athlon.