Thread: OC Phenom X4 9550

Hello everyone.

I decided to oc this processor with an ASUS M3A78-EM board, and I started with this setting but not if it should go up more and raise the Vcore and temperatures are correct for this processor. I also have a doubt as to the NB, what should this value mean? If rises in excess can cause breakage of components?

Could show the temperatures with Everest, I also a bit of a prose Phenom 9550, no one can get oc very high but the voltage is quite good and this prosecutor resistant to 70 ° temperature, the core temp does not seem to me exactly why I ask that you could do with better everest walking around the CPU temperature.

I tube according to everest this prosecutor to 43 ° in normal yield stress and never step 2530 MHz with 54 °, the difference is that the voltage to 1.3V did.....

But you can climb over this processor?

Someone from this forum has done? I think that the bottleneck graph.

Depends on the board you have, if it resists more than 125w for the cpu, asus are some that come to 140W, we can t get a little more and this is accompanied by a good source a good cooler, but in fact the Phenom 9550 is not very good to oc ....

Greetings.

Hi.

Watch as this HT link?

As in 1040 I believe in a Phenom 1000 is equal to the limit? (So nothing happens)

Hello.

The mother that supports 140 W ... is the same as I have.

Not see the picture

I hear you ran crises with the X1550 will be a miracle or is it normal?

3 GHz and asks much voltage, but at about 2.85 I do not think you're going to have problems.

Anyway this is low voltage overclock; go staggering along with the fsb voltage.

I think that 1.42 to 2.9 would have to walk.