Thread: MSI Overclock K9A2

Hello people, I just registered on the forum thinking that maybe can help me solve a little problem I have.

A few days ago I bought Mother, Micro and new RAM because I do not enough to update the rest of the PC I decided to buy an AMD chip with Mother RS780C (780v) and there I read that the HD3100 can be leading a climb little MHz.

Well it is that ATITool will not let me touch the core, getting back on September 0mhz Clock when pressed, the GPU-Z shows me not the frequency, Everest Ultimate Edition if detected at 344mhz core but not the RAM.

Hi!
As a first step find out if you can raise the clock from the BIOS, in my case I have the 780g (HD 3200) and let me take 500 MHz to 999 MHz...

In any case if you can not from the BIOS, download the amd overdrive that can also modify the values and with respect to bandwidth is the same for the memories! So if you got these in dual channel is 6.4 GHz or something.

Hi

Sincerely try to "AMD Overdrive" but it disabled the option to modify the values of the GPU, use the versions 2.1.6.

In some mothers the oc is integrated to a hidden menu, try control + f1.

6.4 GB / s series with a single module of 800MHz in dual channel is 12.8 GB / s (800MHz x 16bytes, 128bit = 16bytes).

I try ctrl + F1 to F12, we also try to read something out there to shift + alt + F2 and then F3 but nothing, also try alt + F1 to shift + F1 and 12 to 12 but nothing, I had a pity XD thrilled with that, perhaps another key combination ...

Have the amd overdrive 2.1.5 I believe and have the option to change the frequency of the core...

I do not think that the Flash BIOS to change anything ... but you could try and it would be updated anyway...

Now updated the BIOS, I was given yesterday to try and jump from 1.2 to 1.3 but did not change anything in the BIOS menu remains the same and not run the programs.

Hello

I do not think you will make ... just Google a bit and many wanted overclocked HD 3100 and also failed to...