Thread: Video in integrated Overclock

I doubt many people have told me that my video ocear can be integrated, but as if I can not be integrated.

MY TEAM
AMD ATHLON 64X2 5200 + @ 3.0GHZ
1GB SUPERTALENT DDR2 800MHZ
INTEGRATED ATI HD3200 (256MB shared memory) this card can play undercover, pro street, call of duty 4 etc but I overclocked to achieve better performance. In the setup I have 2 options overclock CPU clock (CPU) and clock (not that) I wondered if this is the clock from the video card.

GFX is just clock frequency or the 500 MHz of the 3200, got it to upload overclocked.

Good story.

Overclock 500 to 550 and all good then rose to 650 (all from the setup) and the computer starts up normally but when it comes to the part that says WELCOME (when Windows starts) and I never put the welcome screen in black. (The monitor turns off when the program goes off) and then restart and put him at 600 and here I am. That may have happened? Was much 650 MHz? q Google and saw the lead at 750 and 800 easily

Thanks.

Check your temperature, it is also a matter of luck, see you got to 950MHz, but well, every case is unique, my 3450 using the same does not rise to 750 when all the others come to 800/850 without any problems.

That hurts, mine does not go over 550, the 600 works, but I put the call of duty 4 and play about 10 seconds and crashes and VPU RECOVER I restarted the card the card or something so I said, no I understand a lot. I know I can play more than 550 MHz. I would send you a screen while you see the temp and frequency but not as.

In the part where said sensors.

AMD may have noticed that the 3200 left and I reduced the voltage, ESRI's good to see if it can be changed from the bios.

It is normal that, because those trying to read the frequencies and an integrated data. It will not be able to read the reports because they are the system, the textures is the frequency x4, like the pixel has 40 shaders, as 170 million transistors and have no idea that this review can be.

If you can give a bit of voltage to the chipset!

I have the same chipset on an m3a78 and move-in voltages can be used to play at about 780 MHz (800 MHz that will not touch voltage can not) but eh benchmarks pulled a 950 MHz with a little voltage and nothing has happened, so find out whether the item can continue voltage!

I'm going to buy another GB, but one question, as you climb to the chipset voltage from the bios I have only to change the CPU and memory voltages, but nothing more, if you could give a little more voltage you would tell me as.