Thread: Oc 5000 +

Just put this pc:

Asus boards m3a78 pro -
-Athlon 64 x2 5000 + black edition 2.6 GHz
-2 Memories buffalo 800MHz 1GB each
-Video Card asus hd 4670

The truth is that I have never done overclock, but I would like to be increase the multiplier, as it comes unlocked and I would leave it to 200x15 to go to 3GHz.

At its board believes (congratulations on the 5000 + Black) is relatively easy:

Restart the PC and then several times in support of "Del" to enter the Bios.

You go to "Advanced Menu" and find "Jumper Free Configuration" get support "Enter" to find "& Processor Frequency Multiplier" that should normally be in "Auto" and click on the shows you multipliers, and put it to 15 and salts, then you "Processor Voltage" on the same page, enter and get the voltage to 1.40V (if you are 50, 100, 150, choose 100), sales, go to page "Exit" go and choose "Save & Exit "and testing.

Normally, your memories will be working at 428.57 instead of 400, you should be able to support Buffalo smoothly this frequency when the volts that are correct, it is best that you make a memory and checks the label to all workers and volts if so get the exact bios volts (We're in the same Jumper Free Configuration, Memory Over Voltage, upload or low voltage with the keys), each amendment by Exit salts and safeguards.

If by chance does not restart, not just reboot again and enter the BIOS and get a little bit the voltage of your memos, however if you do not perform it, enter the bios and what changes and put it to "Auto" again and then says.