Thread: Geforce 6200 overclocking

I need to help me lower the temperature and especially overclocked a geforce 6200 you put a cooler on a amd k6 but I forgot it was the normal temperature ... Now it gives me atitool the 55th but I want to lower the temperature a little more .. 2 is that the crap down I have a PCI soundblaster live 5.1 and I would not hurt ... so any recommendations?

For you can try the Riva tuner oc I have a 9400 gt and I have done a good oc and I think you upload more ... lets you go up there for a bit ... I recommend that you do not upload much of one ... I had a 6200 and during my time was always between 50th C - 56th C.

Regarding the soundblaster you can put it in the last PCI slot (if you do not have it there) away from most of the 6200 better because it its temperature will not be greatly affected and will have space for the cooler, but it would be a poster image. I hope you will help.

Many 6200 (or all) are blocked oc, is the only way flashes, fijate guide 6200 @ 6600 is on the forum.

Fijate removing the heat sink cooler, vga that should be operating at a lower temp.

The soundcard is in the final as there are 6 or 8 cm more or less plate to plate ... but another question if you put the cooler air has to be given to the board or by removing hot air from the board? (I do not image that I have no room).

Always pulling the cooler air to sink.

You should try moving 3D performance, the bars on the right.

I do not have to switch plate or anything really ... ago as that?

DO NOT flash 6600 without first proving that the Riva tuner can enable hidden pipes, simply flashily to 6200 unless they want to finish with a vga in a vegetative state.