Thread: Card overclock problem

My problem is related to q overclock my video card ...
I have a GeForce 8600GT 256MB!
I download speedfan and EVGA precision!
The speedfan recorded temperature of 55 º C on the GPU! Lo which is much for my taste? Especially if the PC is in a normal state!
When you open the EVGA precision, q I realized what the shader clock can not regulate...
If I move the core, the shader does not move! And I can play with the memory and the fan speed!


55th doing nothing is not a concern, worrying that it would only be overcome by playing the 75th.

Is the EVGA precision last? If not try the Riva tuner that will surely let you move the shader clock.

I need another heat sink overclocked this card before...
Use Riva Tuner and I gave it to the q data clocks found on the Internet on my card ...
Core: 700
Mem: 800
And supposedly the sink makes it stand...
However, the temperature rose 5 ... y al 83º! And little time to get to the 83!
I open the cabinet!
Then use the AtiTool to see the max core and max mem ...
Alcanse only to see the core q max reached 570 with 83 º!

Riva deslinkearlo should be, or if not try downloading the NVIDIA system tools.
Just try to put a fan above the heat sink; you do not need to buy something.

Typically, in this q 540/700
I put the option "find optimal" and I pulled this result...
Leaving on my 60th º t!
Again, nothing appears to shader...
And that percentage increase, if refrigeration is not...
It may be possible to not have a 8600GT card shader!!!????

If you have or if you have that, it's very rare that any editing program that allows frequent oc. See if you gpu-z to see how much wind is.
Climbing the cooling subis% RPM to operate the fan at the vga, would refrigerating better, 13% is very low.

Now I come out a problem with the NVIDIA system tools ...
Change the frequencies and applications ...
I get a notice changes I made are not valid and shall not take effect ...
Leave it with the normal and increased by only refrigeration twice ...
And I said the same thing!

Now really do not understand anything!

There is any way to change the q card bloke x are the bios?
Thank you!

Get newer drivers, which are using are very old.