Thread: Problem with overclock

Hello everybody, I tell them my problem.... overclock and read and all that, to follow the typical steps in the bios everything is fine but when restart my pc died and I have to change a recipe.
Now looking at the bios and when I start raising fsb, (the little climb) after my pc does not run my pc is as follows
plate: Abit Fatality FP-in9
cpu: core 2 duo e4400
ram consists 4gb 800 MHz, 4-4-4-12
and the power that is not c but it is good, as real 650w.

Thanks in advance!

Hello.

Instability is something; maybe the memories are very forced.

Hello.

Stop when the fsb ... divider down the memories.

The memories not touched, only the wave CPU....

Now what the divisor?

Hello.

Down the test reports to 667MHz.

Memory is not ...
Elas trabalham stock 800 MHz FSB = 400
O is 200 FSB Team
you can increase up to 400 (dobra) than having to change memories.
Put em Unlinked as memories.
300 MHz overclock = easy or the FSB and memory 800 to start em
Voltages do change as Processor, Northbridge and a while do FSB
Maintain or FSB strap on more possible.
PLL 1.5
VTT to 1.22 ~ 1.25
disable Spectrums, C1E, Speed Step, Thermal,
Good luck!