This is micro ascend!
I think you could do with that speed (2338 MHz) a run orthos for an hour at least, to see how the temperatures go and see if the line voltages 12v, 5v and 3.3 v more or less maintained....
This is micro ascend!
I think you could do with that speed (2338 MHz) a run orthos for an hour at least, to see how the temperatures go and see if the line voltages 12v, 5v and 3.3 v more or less maintained....
It is a program that stresses both CPU and memory and notifies you if the system is unstable, highly recommended to watch the temp reached by the process to see if you oc and is really stable. Stress 2004 ORTHOS prime, so called.
Friend where you read this aberration, not because I have these 2 cores to work twice as often by the manufacturer.
The two cores will operate at a frequency of 1.8GHz.
Read what you command well to be further clarified.
Hi
Not the temperature of my CPU is super high! Is between 56 and 64.
Thanks
The orthos warms a bit more than the CPU comes in normal use, these are high temp but not enough to jeopardize the CPU, it is important that you let the program run for over an hour, to try to find instability.
Hi
STOP the orthos will tell you when something bad happen, they will put red and if you do not stop at the time you crashed the pc.
Hi
You hit the pc or restart, nothing bad in any case quite normal overclocked.
If the processor reaches high temperatures very low speed, and if it is not enough pc automatically shuts down. Just to relax and give it more time to live (and better oc: P) combine always have good temp.
Hi
I could give advice on how to cool my processor could.
Thanks
Bookmarks