Thread: Athlon XP 2000 +

Hello friends, not long ago passed through here, and when I did helped me a lot to my Celeron ocear, the thing is to leave Intel, and purchased an Athlon XP 2000 + processor with a plate-LSR MSI K6TV data processing:

AMD Athlon XP, 2083 MHz (12.5 x 167) 2600 +
CPU Alias: Thoroughbred-B
Core voltage: 1.50 - 1.65 V

FSB
Watch real 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB / s

as you can see it already has an OC and the temperature is at 49 degrees
The cooler is a Volcano 6

Can get more juice to this process? Could make far more overclock? Something that is not lost for ever with amd I have tried, any suggestions are welcome.

Hi!
Say that when the temperature is 49 degrees, you refers at full load or at rest?
What we can do is to try yourself going where you can get; I think that is the most accurate answer anyone can give you!

Greetings and good luck with that!

Thanks for answering.

49 degrees with msn, quake 2, and team speak, I think it would load, but it is a recommended temperature for amd process? Something likes average temperature to know when to stop.

Hi

I have an amd ... I think 65 degrees is the limit, but obviously those temperatures obtained when the machine got 100% so, went quiet!

Hi

Not bad, if you know the coefficient? (L1 bridges) because then you can do to run quietly 13x166 = 2160 according to AMD 2158, but in reality (2700 +) and 1.65V.

Now it's 2113, is that I have not touched the multiplier, only the FSB, which is on 170 and multiply this by car, but have proved if I can do that.

EDIT: to make that configuration, I am an athlon 850 blocked xD I think this ratio (that I understood that it was) that did was raise the FSB to 175 before I left that to start XP screenshot, but he raised the Vcore to 1.65, now departed and if goes well so far.