Thread: Overclocking 5000 +

First, the specifications of my pc

- AMD Athlon 64 X2 5000 +
- ECS GF8200A (Black Series)
- ECS Geforce 8800GT DT 512
- 2 Gb RAM Kingston PC2-6400

Work with AMIBIOS v02.61

The problem I have is that the BIOS will not allow me to control the multiplier.

If your CPU is not black edition but can not upload the multiplier...
You change the speed multiplier and stock is 2600 MHz (200x13 = 2600 MHz)
voltage multiplier to save energy and increase the life of your CPU.

Now seeks to enlarge the temperature in the bios to make sure.

Hi

Limiting one thing, the plate you do not have many options where to get overclock maybe you could play.

Skiing with the old board that had SI could change the multiplier and there's no other way to raise my process?

In the bios tells me that the processor at 33 º.

As seen in the bios are the CPU voltage as if it was 1.6 in my view temperatures.

The multiplier can look but not climb the max on my CPU and X9 is at rest when it comes to X6.

The only method for best results.

The core voltage is in Auto and is the default option, and t | does not fire...

I have a Thermaltake Mini Typhoon Cooler.

Hi

The place where it says there is hardware monitor.

As you see the oc just that voltage (the first off cool & quiet)

Go up the fsb in 5 of 5 become unstable when you get up to and that the oc voltage, that would have began to upload.

The screen says 1.6 Vcore?

So low that you disable automatic multi micro... the fart is that...

Leave the stock Vcore, not automatic.... and does what you said, but also increased the divider of the reports so you do not fuck the oc.

The multipliers do not search but that distinction must be here somewhere!

Had read a review that the mother was not good that you overclock ... but attempts.