Thread: Phenom 9550

Hi

Depends on the Phenom, the first line went bad for overclock. At the moment I have a really good Phenom x3.

I enter the bios and upload to (230 x 11), but the memory also goes up and does not restart automatically. We also got a little microphone and the voltage of the memos, but the same thing."

Reduced rates for first memories? 533 serve as configured not to grow so they can raise the fsb more.

If you spent on the frequencies, and the memories do not would raise more too can not you leave, I will not let me raise the fsb more than 28, question 5 in 5 if you walk right by the 215 or 220 fsb the problem is not the board or the process, download the reports and there will not hand the targets voltage if they do not drive well. Greetings.

Hello

Until the 9600 series were not good for the OC from there up and with the new X3, but gt have to see that the board allows you to OC what you want.

I also have a Phenom 9550 mounted on a MSI K9A2 Platinum 2 x 2GB Corsair XMS2, change the FSB speed to 230. Everest with a 230 FSB but I too am going to be hung when it was upgraded from 230 to 250 through the BIOS. It seems the memories are not the problem since according to the previous image when the FSB is at 230 to 460MHz is reports. Besides, I can not change the BIOS as they are set to auto and I can not change

Other voltages can be go up, I at least on my MSI K9A2 CF-F V2 raised the voltage of the memos to the Vcore to 2.0V and 1.4V and not a problem and that first rose from 2.5 to 2.8 hit and after 2.8 to 3.0Ghz and fan Stock. Like after I gave Sphere under 12 and in the process idle at 31 ° and 43 ° full.

Greetings.

The Phenom has not been characterized by good pal is oc ... but still are not sure the memos. Divider CPU / ram... 533 or leave it as you has said... So that the frequencies of the memos to change as little as possible... then have a stable oc with the process...

I have an MSI k9a2 VM-F V2 ... is a model for under the CF ... and I have a Phenom 9550 B3 which goes perfectly with the voltage to 2.6 in STOCK I can not move the Vcore on my mother. I tell them otherwise ... when I was an FTE of generic 450W ... this was not so ... to 2.6 can not hardly open my msn already restarted the pc ... a little time you buy a CX 500W Real ... and this is just the problem. PD: I'm a fan of AMD ... but better than a 6600 chip ... not to re-build in the story.

Greetings.